Vertical System
|
| Rise time |
300 ps |
| Bandwidth |
1 GHz |
| Input Channels |
4 |
| Bandwidth Limiters |
20 MHz, 200 MHz |
| Input Impedance |
1 MΩ ± 1.25% || 16 pF ± 2 pF, 50 Ω ± 1.5% |
| Input Coupling |
AC, DC, GND |
| Maximum Input Voltage |
1 MΩ: ± 250 Vpk, 50 Ω: 5 VRMS |
| Channel-Channel Isolation |
≥ 40 dB at 100 MHz
≥ 30 dB at 1 GHz |
| Vertical Resolution |
8 bits |
| Sensitivity |
1 MΩ: 2 mV/div - 10 V/div
50 Ω: 2 mV/div - 1 V/div |
| DC Gain Accuracy |
±1.5% |
| Offset Range |
±1 V: 2 mV/div - 99 mV/div
±10 V: 100 mV/div - 1.0 V/div
±100 V: 1.02 V/div - 10 V/div |
| |
Horizontal System
|
| Time/Division Range |
200 ps/div - 1000 s/div |
| Clock Accuracy |
5 ppm |
| Trigger and Interpolator Jitter |
3 ps (rms) |
| |
Acquisition System
|
| Single-Shot Sample Rate/Ch |
10 GS/s on 2 Ch
5 GS/s on 4 Ch |
| Equivalent Sample Rate |
50 GS/s |
| Memory |
32 Mpts/Ch on 2 Ch
16 Mpts/Ch on 4 Ch |
| |
Acquisition Modes
|
| Averaging |
Up to 1,000,000 |
| Peak Detect |
na |
| Interpolation |
Linear, Sin x/x |
| Enhanced Resolution |
Up to 11 bits |
| Sequence Mode |
Up to 5,000 segments |
| |
Triggering System
|
| Modes |
Normal, Auto, Single, Stop |
| Sources |
Ch 1 - Ch 4, EXT, EXT/10, AC Line |
| Coupling Mode |
AC, DC, LF Rej, HF Rej, |
| Pre-trigger Delay |
0 - 100% Full Scale |
| Post-trigger Delay |
0 - 10,000 Divisions |
| Trigger Sensitivity |
1.0 division: 200 MHz
1.5 divisions: 600 MHz
2.0 divisions: 1 GHz |
| External Trigger Sensitivity |
Ext: 50 mV from DC to 10 MHz
200 mV from 10 MHz to 600 MHz
Ext/10: 0.5 V from DC to 10 MHz
2.0 mV from 10 MHz to 600 MHz |
| External Trigger Input Range |
Ext: ±0.4 V, EXT/10: ±4.0 V |
| |
Display
|
| Type |
Color Touch Screen 10.4" TFT-LCD |
| Resolution |
SVGA: 800 x 600 |
| Grid Styles |
YT, XY |
| |
Trigger Types
|
| Standard Triggers |
Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV), Runt, Slew Rate, Interval, Dropout, Qualified |
| Optional Advanced Triggers |
na |
| Optional Serial Data Triggers |
I2C, SPI, UART/RS-232, CAN, LIN, FlexRay, MIL-STD-1553, ARINC 429, Audio (I2S, LJ, RJ, TDM), USB, MIPI D-PHY, DigRF3G |
| |
Internal Storage
|
| Waveform Storage |
4 memory waveforms plus internal HDD |
| Setup Storage |
6 setups |
| |
Math
|
| Number of Math Traces |
1 |
| Standard Math Functions |
Add, Subtract, Multiply, Divide, FFT, Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Enhanced Resolution, Floor, Integral, Invert, Reciprocal, Rescale, Roof, Square, Square Root |
| Optional Math Functions |
na |
| |
Measurements
|
| Number of Measurements Displayed |
6 |
| Measurement Parameters |
Ampltidue, Area, Base, Delay, Duty Cycle, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Phase, Rise Time (10% - 90%), Rise Time (20% - 80%), RMS, Skew, Standard Deviation, Top, Width+, Width- |
| |
Interface
|
| GPIB Port |
1 (optional) |
| USB (Device) |
0 |
| Ethernet Port |
1 |
| USB (Host) |
5 |
| Serial Port |
1 |
| |
Probes
|
| Probes |
Qty. (4) ÷10 Passive Probes |
| Scale Factors |
Automatic/Manual: ÷1, ÷10, ÷20, ÷100, ÷200, ÷1000, ÷2000, ÷10000
Variable: (÷1x10-6 - ÷10000) |
| Calibration Output |
1 kHz square wave, 1.0 Vp-p, output to probe hook |
| |
Power Requirements
|
| Voltage |
90 - 264 VAC, 47 HZ - 63 Hz
90 - 132 VAC, 380 HZ - 420 Hz |
| Max. Power Consumption |
340 VA |
| |
Environmental and Safety
|
| Temperature (Operating) |
5 °C to 40 °C |
| Temperature (Non-Operating) |
-20 °C to 60 °C |
| Humidity (Operating) |
80% RH, 31 °C
50% RH, 40 °C |
| Humidity (Non-Operating) |
95% RH |
| Altitude (Operating) |
2000 m |
| Altitude (Non-Operating) |
12,192 m |
| |
Physical Dimensions
|
| Dimensions (HWD) |
260 mm x 340 mm x 152 mm
(10.25" x 13.4" x 6") |
| Weight |
7.26 kg. (16.0 lbs.) |
| |
Warranty and Service
|
| Warranty and Service |
3-year warranty; calibration recommended annually. Optional service programs include extended warranty and calibration services. |